The
GVS9000 AMD Optron 8-Way processor hypertransport Edition this
feature-rich core-logic component provides sophisticated I/O functionality
to systems implementation HyperTransport technology. Replacing
the traditional "Southbridge," this component integrates
storage, connectivity, audio, I/O expansion, security, and system
management functions into single system 128-bit
dual channel memory bus total five hardware monitoring
IC for each AMD chip, 128GB
Registered ECC DDR Memory. Maximum
bandwidth of up to 6.4GB/s
with upto 512MB Video
Graphic RAM selection with Dual PCI Express 16x
GVS9000
8XCPU QUAD AMD OPTERON Processor Workstation Render Farm or Server
with speed available up to AMD 875 series processors, with high speed
15K RPM SAS, SATA2, U320 or Fibre internal storage option SAN or NAS
high-bandwidth
in 64-bit rack-optimized computer workstation with Graphics
card suport.
Specification:
Processor
• Quad µPGA 940-pin ZIF sockets
• Supports up to four AMD
Opteron™ 800 series
• Supports Single
and Dual Core processors
• Four onboard 3-phase VRMs
• Integrated 128-bit DDR memory controller
Chipset
• AMD-8131™
HyperTransport™ PCI-X Tunnel
• AMD-8111™
HyperTransport™ I/O Hub
•
Winbond™ W83627HF
Super I/O ASIC
• Total five Hardware Monitoring IC:
• Two ADT7463 and three LM63
Memory
• 128-bit dual channel memory bus
• Total 32 184-pin 2.5-Volt DDR DIMM sockets
- 4 for each CPU
• Supports up to 32 / 64 /128GB of Registered
DDR
• Supports ECC and ECC with Chipkill type
• memory modules
• Supports single-/dual-/four-rank
Supports DDR 400 / 333 / 266 /
200 memory
Expansion
Slots
• Two independent PCI-e buses
• PCI Express Graphics (x16) slot
• PCI Express (x16) slot with x4 signal
• 64-bit133/100/66 MHz PCI-X slots
• Two 64-bit 100/66 MHz PCI-X slots
• Total of five usable slots
Integrated
I/O
• One floppy connector supports one drive
• Two 9-pin serial ports (1 connector & 1
header)
- and one 25-pin parallel port pin-header
• PS/2 mouse and keyboard connectors
• Four USB v1.1 front panel headers (AMD-8111)
• Two USB v2.0 rear connectors (VT6212)
System
Management
• 3-pin fan headers (9) w/ tachometer monitoring
• 3-pin fan headers (4) w/ (PWM) speed control
Integrated Enhanced IDE Controller
• Provides two IDE dual-drive ports for up to
four
EIDE devices
• Supports for UDMA 33/66/100/133 IDE drives
• and ATAPI compliant devices
IEEE1394
• TI IEEE 1394a (FireWire) ports
Integrated
On-Board Graphics
• ATI® RAGE™ XL PCI graphics controller
• 8MB Frame Buffer of video memory
Integrated
LAN Controllers
• Broadcom BCM5704C dual-channel GbE LAN
- Two RJ-45 LAN connectors with
LEDs
- Connected to PCI-X Bridge A
- Support Jumbo Frame
• Two Front Panel LED headers
Integrated
Serial ATA Controller
• One Silicon Image SI3114 controller
• Four Serial ATA 1.0 ports
• Supports up to four SATA drives
• Supports RAID 0, 1, 0+1
Intelligent
Platform Management Interface Header
• Server Management Daughter card
(optional) supports features listed
below via
IPMI header
• Baseboard Management Controller (BMC)
• Tailored for IPMI
• Supports KCS and BT styles
• Flexible Windows & Linux Management Solution
• Supports RMCP and SNMP protocols
• Supports ASF standard and EMP
• I2C serial multi-master controllers and UARTs
• Build-in IPMB connector
• Remote power on/off and reset support
(IPMI-over-LAN)
BIOS
• Phoenix BIOS; 4Mbit LPC Flash ROM
• Watchdog timer
• USB boot support
• 48-bit LBA Support
• Supports PXE via Ethernet
• ACPI 2.0 & 1.0B support
Form Factor
• SSI MEB footprint (13"x16"; 330.2x406.4mm)
• EPS12V power connectors
• Serial (one) and VGA (one) connectors
• Stacked USB 2.0 (two) connectors
• Two RJ-45 side-by-side LAN connectors with
LEDs
Regulatory
• FCC Class B (Declaration of Conformity)
• European CE (Declaration of Conformity).
